CLICK HERE TO SEE A BIGGER PICTURE !

SMM24P532100L
Industrial Grade
Green Laser Module
100mW 532nm
DPSS Line Beam
also available on
DPSS DOT Beam
Model No. SMM24P532100L
  Wavelength 532  nm
  Spatial Mode TEM00 
  Output Power  100 mW
  Residual IR (1064&808nm) <0.01%
  Operation Current 0.30~1.20 A
  Operation Mode CW or Modulation
  Linewidth <0.1 nm
  Polarization Linear
  Beam Spot Shape Circular, aspect ratio<1.1:1
  Pointing Stability <0.05 mrad
  Beam Width 2 mm
  Beam Divergence 0.5 mrad
  Power Stability* <5% per 2 hrs
  Temperature Stabilizing TEC
  Warm Up Time <5 minutes
  Beam Quality (M2) <1.2
  Optimum Operating Temp. 20~30oc
  Storage Temperature 10~50oC
  MTTF** 5,000 hrs
  Dimensions Dia.24x67 mm
  Power Supply SMPW-S2  (Included)
  Weight 2 Oz.
*A heat sink is mounted at the bottom to dissipate heat
**MTTF (Mean Time To Failure) is based on the MTTF rating of 808nm laser diode from the laser diode manufacturer.
 
CLICK HERE FOR THE LASER MAIN PAGE
Our Laser Diodes, Laser Modules and Laser Accessories are designed solely as OEM components for incorporation into the customer's end products. Therefore, the above mentioned products do not comply with the appropriate requirements of FDA 21CFR, section 1040.10 and 1040.11 for complete laser products. If needed, customers should submit their own finished product to FDA for certification for the product as a whole
CLICK HERE FOR LASER CLASSES SAFETY GUIDELINES




 CLICK TO SHOP FOR LASERS

 HOME   -   CONTACT